Use Cases

Iconic 3D-printed concrete column showcasing complex geometry and structural performance.

3D-printed concrete façade panel with a stone-clip attachment system, hand-portable, with a ~15 minute print time.

3D-printed formwork for architectural columns at the Aubervilliers Olympic pool.

3D-printed precast marine walls for coastal infrastructure.

Tall 3D-printed concrete mast for telecom infrastructure, demonstrating vertical printing capability.

First 3D-printed social housing project in France. Five homes built using XtreeE technology.

Sculptural 3D-printed concrete structure for artist Eva Jospin at the Palace of Versailles.

3D-printed structural beam connection nodes, optimized geometry reducing material use.

3D-printed inspection chambers for underground utility networks.

Artistic urban sculpture showcasing 3D concrete printing for public space design. Doubles as a planter.

3D-printed starting bell for tunnel boring machine, complex geometry for civil engineering.

Innovative spatial lattice structure demonstrating the structural potential of 3D-printed concrete.

This project was made for Laura Bontemps, sculpture conservator-restorer of the Oise archaeological museum.

3D printing process featuring dynamic coloring of concrete, tinted in the mass.

This artificial reef prototype was printed on a dome-shaped support, for which we had to orient the printing head up to 90°!

Rehabilitation of the Schuman residence in Poitiers by EmPrinte

This sculpture, on display at the Futurium Museum in Berlin, was co-designed in a workshop with Berlin architects and designers: when additive manufacturing offers new perspecti…

Item presented as part of the "Imprimer le Monde" (Print the World) exhibition held at Centre Pompidou Paris from 15 March to 19 June 2017.

This wall comes from the DEMOCRITE university research project.

This monumental staircase made by Arca Ébénisterie (link: https://arcaebenisterie.com/) is the result of a high-level collaboration between metalwork, woodworking and 3D concret…

This set of reefs targets a particular animal species: the Grouper.

What if 3D printing were compatible with bio-design ?

This sculpture makes good use of the intrinsic qualities of wood and concrete.

Cette série de trois bancs est issue de la collaboration entre XtreeE et Studio 7.5, agence de design basée à Berlin.

The purpose of these reefs is to promote underwater biodiversity by creating sustainable structures with high variability.

Traditionally made of wood, Reservation boxes are used to provide room for various electrical networks, HVAC and plumbing before casting concrete walls.

These 3D printed surrounds come to crown the trunk of the trees of the park of Claye-Souilly, by bringing him a floral composition in more.

XtreeE is one of the 18 partners participating in the construction of the YRYS Concept House, a project supported by Maisons France Confort, France's leading builder of single-f…

These panels, all different, are a series of prototypes of non-standard facade elements.

XtreeE co-developed this underground piece in 3D concrete printing in partnership with Point P Travaux Publics and Sade.

This structure was made for the Renouard wine estate and is intended as a bat nesting box.

The new shapes made possible by 3D printing also require the development of new design methods, such as here the addition of woven concrete surfaces on certain parts of this rec…

We've done it! 3D printing leather, without petrochemicals and with low carbon impact.

These prototypes for the Swiss Pavilion at the Venice Architecture Biennale 2016 were an opportunity to experiment with a new fabrication technique: concrete sprayed on a 3D-pri…

These urban pots bring a touch of elegance to the streets of Istres but also serve as safety bollards.

For the 77th Congress of the USH (Social Housing Union), XtreeE 3D printed a new concrete wall, in collaboration with Habitat 76 (social landlord of Seine-Maritime).

Seaboost and XtreeE have combined their unique skills in ecological engineering and large-scale 3D printing to design, manufacture and immerse this next generation reef.

Meta Utopia Exhibition – Zaha Hadid Gallery (London)

In anticipation of the 2024 Olympic Games, public authority Plaine Commune has entrusted a consortium led by Freyssinet in association with Lavigne & Cheron Architectes, Quadric…

This table stand fulfills the promise of mass customization associated with 3D printing.

At VINCI's new ‘Archipel’ headquarters, in the La Défense business district, XtreeE took part in the 76,000 m2 construction site.

Prince Albert II of Monaco asked his friend Pierre Frolla, four-time world record holder in diving and a great defender of biodiversity in Monaco, to think about the immersion o…

Two robots were calibrated to work simultaneously in the printing of this wall.

XtreeE technology allows printing in various directions, including vertical walls !

This architectonic column is our first structure in a public building, in Aix-en-Provence, France.